NEW Full Exhaust System 2.0L 1995cc 1989 - 1994 SWB
NEW Full Exhaust System 2.0L 1995cc 1989 - 1994 SWB
NEW Full Exhaust System 2.0L 1995cc 1989 - 1994 SWB
NEW Full Exhaust System 2.0L 1995cc 1989 - 1994 SWB
NEW Full Exhaust System 2.0L 1995cc 1989 - 1994 SWB
  • Afbeelding in Gallery-weergave laden, NEW Full Exhaust System 2.0L 1995cc 1989 - 1994 SWB
  • Afbeelding in Gallery-weergave laden, NEW Full Exhaust System 2.0L 1995cc 1989 - 1994 SWB
  • Afbeelding in Gallery-weergave laden, NEW Full Exhaust System 2.0L 1995cc 1989 - 1994 SWB
  • Afbeelding in Gallery-weergave laden, NEW Full Exhaust System 2.0L 1995cc 1989 - 1994 SWB
  • Afbeelding in Gallery-weergave laden, NEW Full Exhaust System 2.0L 1995cc 1989 - 1994 SWB

NEW Full Exhaust System 2.0L 1995cc 1989 - 1994 SWB

Normale prijs
$290.57
Aanbiedingsprijs
$290.57
Normale prijs
Uitverkocht
Eenheidsprijs
per 
Verzendkosten worden berekend bij het afrekenen.

A good quality full exhaust system, brand new, made in the UK. Comes complete with fitting kit. Please make sure your model matches the description as there are many different exhaust systems and sections which all vary depending on the engine, year and wheelbase.

Suitable for the following Trafic models:

2.0 (1995cc) Petrol 1989 - 1994 (Short wheel base models only)

Please note this will NOT fit chassis cab based vehicles as they used a different system completely.

To determine if you have a short wheel base (SWB) or long wheel base (LWB) vehicle you can measure from the centre of a front wheel to the centre of a rear wheel. The measurements will be either:

SWB - 281cm

LWB - 322cm

This sytem has the later type of backbox which uses the flat type hanger. This is identified by having two pins on the tailpipe. Earlier ones (pre - mid 1989) use a single pin hanger, please see our other listings for these.

 

This system comprises the following sections:

Front downpipe

Middle silencer

Rear pipe

Backbox


Also included is a fitting kit comprising:

x3 Clamps

x3 Rubber ring hangers

x3 Wire hanger clips (these clip into the chassis to support the rubber hangers)

x1 Backbox hanger (flat type)